Pipe Fittings and Flanges Manufacturers in India | Seamless & Welded Pipe Manufacturers | Flexible Hose Pipe Manufacturers | Email Us on sales@metline.in
₹3,350.00
UNS N04400 or DIN W.Nr. 2.4360 / 2.4361, Monel 400 (also known as “Alloy 400”) is a solid-solution nickel-copper alloy with high strength and excellent resistance in a range of media, including seawater, hydrofluoric acid, sulfuric acid and alkalies. The Alloy 400 is also very resistant to stress-corrosion cracking and pitting corrosion in most fresh and industrial waters. Monel 400 is widely used in many fields such as marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, flanges, fittings, fasteners, and heat exchangers.
UNS N05500 or DIN W.Nr. 2.4375, Monel K-500 (also known as “Alloy K-500”) is a precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of Monel 400 (Alloy 400) with greater strength and hardness. It also has low permeability and is nonmagnetic to under -100°C[-150°F]. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. Monel K-500 is used primarily for pump shafts, oil well tools and instruments, doctor blades and scrapers, springs, valve trims, fasteners, and marine propeller shafts.
| NICKEL ALLOYS | TRADENAME | UNS NO. | WERKSTOFF NO | DENSITY (8.8 G/CM3) |
| Alloy 400 | Monel 400 | N04400 | 2.4360 | 8.83 |
| Alloy K-500 | Monel K-500 | N05500 | 2.4375 | 8.44 |
| Monel K500, % | Nickel | Copper | Aluminum | Titanium | Carbon | Manganese | Iron | Sulfur | Silicon |
| ≥63.0 | 27.0-33.0 | 2.30-3.15 | 0.35-0.85 | ≤0.25 | ≤1.50 | ≤2.0 | ≤0.01 | ≤0.50 | |
| Monel 400, % | Nickel | Carbon | Manganese | Iron | Sulfur | Silicon | Copper | ||
| ≥63.0 | ≤0.30 | ≤2.0 | ≤2.50 | ≤0.024 | ≤0.50 | 28.0-34.0 |
| Size | Normal Dia : ¼" to 4" 6-100 mm |
|---|---|
| Surface Finish | Blackening, Cadmium Zinc plated, Galvanized, Hot Dip Galvanized, Nickel Plated, Buffing, P.T.F.E. Coated |
| Threads | Metric, BSW, BSF, UNC, UNF, and as per costumers requirement |
| Meaning | A nut is a type of fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads' friction, a slight stretch of the bolt, and compression of the parts. |
| Grades | DIN 6915 CI. 10, Stainless Steel AISI 304 / 316. Heavy hex nuts ASTM A194 Gr.8, 8M |
