Pipe Fittings and Flanges Manufacturers in India  |   Seamless & Welded Pipe Manufacturers  |   Flexible Hose Pipe Manufacturers  |  Email Us on sales@metline.in

Monel 400 Bolts & Nuts Suppliers. Monel 400 Studs Bolts, Monel 400 Hex Nuts & Bolts

Monel 400 Nuts & Bolts, Threaded Rods & Fasteners

3,350.00

Monel 400 Nuts & Monel 400 Bolts Manufacturers & Suppliers, Monel 400 Stud Bolts, Monel 400 Hex Head Bolts & Nuts, Monel 400 Threaded Bars with Washers

  • Monel 400 Fastener Products: Monel 400 Hex Head Bolts, Monel 400 U Bolts, Monel 400 Eyelet Bolts, Monel 400 Hex Nuts, Monel 400 Washers, Monel 400 Stud Bolts, Monel 400 Threaded Rods, Monel 400 Screws
  • Our Manufacturing Size for Monel 400 Nuts & Bolts Ranges from M6 to M100 with Varied Lengths
  • Monel Grades: Monel 400, Monel K500

Metline is a full line manufacturer of Monel 400 nuts and Monel  400 bolts in accordance with DIN, ASME, ASTM and ISO standards. Monel 400 nuts and bolts exhibit good mechanical properties from sub-zero temperatures up to about 550 °C (1020 °F). They are approved for use in pressure vessels with wall temperatures from -10 to 425 °C (14 to 800 °F) . The most commonly used Monel Alloys for manufacturing nuts and bolts are Monel 400 and Monel K500.

Description

Specialist Manufacturers & Suppliers of Monel 400 Bolts, Monel 400 Hex Nuts, Monel 400 Threaded Rods & Monel 400 Fasteners

Metline offers a complete range of Monel 400 nuts and bolts such as screws, hex bolt, hex nut, flat plain washer, anchor bolts and U bolts. Metline is a specialist manufacturer of Monel 400 nuts and Monel 400 bolts in size range of M6 to M100, 1/4″ to 4″ in standard and custom lengths.

UNS N04400 or DIN W.Nr. 2.4360 / 2.4361, Monel 400 (also known as “Alloy 400”) is a solid-solution nickel-copper alloy with high strength and excellent resistance in a range of media, including seawater, hydrofluoric acid, sulfuric acid and alkalies. The Alloy 400 is also very resistant to stress-corrosion cracking and pitting corrosion in most fresh and industrial waters. Monel 400 is widely used in many fields such as marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, flanges, fittings, fasteners, and heat exchangers.

UNS N05500 or DIN W.Nr. 2.4375, Monel K-500 (also known as “Alloy K-500”) is a precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of Monel 400 (Alloy 400) with greater strength and hardness. It also has low permeability and is nonmagnetic to under -100°C[-150°F]. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. Monel K-500 is used primarily for pump shafts, oil well tools and instruments, doctor blades and scrapers, springs, valve trims, fasteners, and marine propeller shafts.

Equivalents of Monel Alloys

NICKEL ALLOYSTRADENAMEUNS NO.WERKSTOFF NODENSITY (8.8 G/CM3)
Alloy 400Monel 400N044002.43608.83
Alloy K-500Monel K-500N055002.43758.44

Chemical Composition of Monel Alloys

Monel K500, %NickelCopperAluminumTitaniumCarbonManganeseIronSulfurSilicon
≥63.027.0-33.02.30-3.150.35-0.85≤0.25≤1.50≤2.0≤0.01≤0.50
Monel 400, %NickelCarbonManganeseIronSulfurSiliconCopper
≥63.0≤0.30≤2.0≤2.50≤0.024≤0.5028.0-34.0

 

Additional information

Size

Normal Dia : ¼" to 4" 6-100 mm
Length : As Specified by user or Upto any Length

Surface Finish

Blackening, Cadmium Zinc plated, Galvanized, Hot Dip Galvanized, Nickel Plated, Buffing, P.T.F.E. Coated

Threads

Metric, BSW, BSF, UNC, UNF, and as per costumers requirement

Meaning

A nut is a type of fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads' friction, a slight stretch of the bolt, and compression of the parts.

Grades

DIN 6915 CI. 10, Stainless Steel AISI 304 / 316. Heavy hex nuts ASTM A194 Gr.8, 8M
ASTM A 194 Gr. 2H, 2HM, G4, G7, G7M, A563/A563M Gr. A, B, DH / 8S/ 10S.
DIN934 / BS3692 CI.6, 8, 10, 12. BS4395 Part 1 & 2

Go to Top